How big is a myford ML7?
The Super 7 Connoisseur is a Vari-speed, belt driven, backgeared, screwcutting, bench mounted centre lathe – 89mm (3. 1/2″) centre height x 475mm (18. 3/4″) or 780mm (30.
Are myford lathes metric?
For customers who own an Imperial Myford ML7, ML-7R or Super 7 lathe, with a Quick Change gearbox later than 1956, Myford offer a metric conversion set Part No 1481/1 to enable a full range of metric threads to be cut ranging from 0.2 mm pitch through to 4.00 mm pitch.
How long is a myford Super 7 lathe?
31″
It is a long bed Super 7 (31″ between centres), making it ideal for instrument makers and gunsmiths.
How much does a myford Super 7 weight?
31 inch Nett weight (including motor) approx. 245 lb.
Where is the serial number on a myford lathe?
On older machines it is at the tailstock end of the bed on the back vertical shear. For newer machines it just below the front vertical shear, left hand end of the bed just before the gap.
How heavy is a myford ML10 lathe?
According to the sales leaflet of the time, a basic ML10 with standard equipment and no motor weighs 53 kg, the raising blocks are 4.9 kg and the motor is 11.5 kg.
How much does a myford ML10 weigh?
How heavy is a myford ML10?
When did the Ford ML7 Super 7 come out?
Thus, in late 1952, the Super 7 was launched (with the provisional catalogue dated November of that year) – a machine that was able to accept all existing ML7 accessories. Although popular, neither the ML7 or Super 7 was never inexpensive, but have always been excellent investments.
Are there any copies of the ML7 lathe?
A number of copies of the ML7 have been found, some quite dreadful but also including a rather fine one, shown at the bottom of the page, by the Italian firm Minganti. Badge used on the spindle belt guard cover on all ML7 lathes 1947 – and the Myford publicity department produced this sectional drawing.
What is the difference between the ML7 and ml7r?
The ML7R was not based on the ML7 but on the Super 7 – the model being created by leaving off the spindle clutch and fitting the less expensive cross and top slides from the ordinary ML7.
What is the bore size of a MyFord 7 10 changewheel?
Myford Series 7 10 changewheels of all years are 20 D.P. with a 14.5-degree pressure angle, 3/8″ thick (0.375″) with a 5/8″ bore (0.625″) and 1/8″ keyway (0.125″). Supplied as standard with an ML7 or Super 7, the changewheel set comprised: 2 x 20, 25, 30, 35, 38, 40, 45, 50, 55, 60, 65, 70 and 75t.
