What does F04 mean on a washing machine?
Bosch washing machines give the f04 error code when the water leak is detected. The possible causes of this error include: problems with the drain of the device; cuvette (powder dispenser) malfunctions; manhole cuff failure.
How do you reset the error on a washing machine?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do you drain a CDA washing machine?
Unplug the machine. Place a bowl near the filter to collect water. Open the filter cover. Pull out and place the emergency draining tube over your bowl.
What does error code F04 mean?
An Indesit washing machine producing error F04 is producing an error code that means, “pressure switch jammed on empty – check pressure switch and module”. The pressure switch works on air pressure and lets the main programmer (or PCB) know when the washing machine has water inside.
What does F04 mean on a Hotpoint washing machine?
Blockage or pump issue
Hotpoint Washing Machine Error Codes
| Error Codes | Fault Type |
|---|---|
| F04 | Blockage or pump issue |
| F06 | Door lock problem |
| F07 | Circuit board and/or heating element fault |
| F08 | Heating element fault |
What is kink in washing machine?
Look behind the washer and determine if the drain hose has sagged down far enough to form a kink that cuts off the water flow.
What does E4 mean on a criterion washer?
The meaning of the E4 error in Samsung washing machines The drum imbalance in the washing machine occurs when the device is unevenly loaded with laundry. Most often, this error occurs during spinning. It can happen in the third or seventh minute.
What does IE mean in washing machine?
An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen. Once the temperature increases above freezing, the water supply will resume.
How do you reset the control board on a washing machine?
Turn the machine on with dry hands. If it still won’t start, unplug it or turn the circuit breaker off, then back on until the breaker firmly clicks in place and plug the machine into the outlet. Push the restart button. Some machines may require you set the knob to a specific setting for the reset feature to work.
How do you unblock a washing machine drain?
To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.
What are the error codes on a CDA washing machine?
Display and Failure Codes. CDA washing machine fault codes will vary slightly depending on your appliance model. See a range of common CDA washing machine error codes here: Error code F01 – the issue here is no water coming in; Error code F02 – the machine will not drain; Error code F04 – the appliance will not start
What does F04 mean on a Bosch washing machine?
The fault code (error code) F04 on a Bosch Washing Machine means that the machine hasn’t been able to pump out.
Why is the F02 indicator on my washing machine flashing?
The reasons for the F02 indicator may be the following: The washing machine drain pump is blocked, building drainage pipes are blocked, or incorrect pump electrical connection. If the pump is blocked, gain access to it, cleaning the filter. If the problem persists, please arrange an engineer visit.
What does C03 mean on a washing machine?
If this failure is detected, C03 will appear on the display. This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations. The solution is to select a spin-drying programme.
